HP D5970A - NetServer - LCII Installation Manual page 23

Chapter 2
Table 2-2. Rear Panel Indicator Definitions
Indicator
Link LED
Activity LED
100 mbps LED
Figure 2-3. Rear Panel and Ports
Definition
This LED goes on to indicate that both the
network adapter in the LPr and the network
switch are receiving power and that they are
properly connected.
This LED flashes to indicate data transfers
to/from the LPr network adapter. The rate of
flashes varies directly with network traffic.
This LED goes on to indicate that the LPr
network adapter is supporting transfers at the 100
mbps (million bits per second) rate. When off, the
LPR is working at 20 mbps.
Controls, Indicators, and Ports
15