Step 4: Assemble The Rails - HP D5970A - NetServer - LCII Installation Manual

Chapter 9

Step 4: Assemble the rails.

To assemble the two rails:
Slide the rail pieces together.
Both rails work on either side of the rack.
NOTE
As you go through the following steps, finger tighten the
screws holding the rails, rear stops, and the LPr chassis to the
rack. Once all the parts are in place, use the T25 driver to
tighten all 12 screws in a couple of passes as you apply
downward pressure on the chassis to ensure it seats correctly.
68
Figure 9-8. Assembly of the Rails
Mounting the Server in the Rack