HP D7171A - NetServer - LPr Upgrade Manual page 35

Chapter 3
25. Remove three
screws.
25. Remove the three screws connecting the I/O tray to the chassis. (See
Figure 3-10.) From the back of the NetServer, there are two screws on the
right and one on the left.
26. Disengage the I/O tray from the midplane board by opening the latches.
27. Remove the I/O tray by lifting it up and out of the chassis.
Place the I/O tray on the table of items that will not be reused.
27. Lift straight up
to remove.
26. Disengage the I/O tray
by opening the latches.
Figure 3-10. Remove I/O Tray
Disassembling the LXr 8000
29