HP D7171A - NetServer - LPr Upgrade Manual page 65

Chapter 5
Locate 3 Long Folded-Foam Gaskets
for Top of Power Supply Bays
Locate Open Tab
of Metal Gasket
22. Locate the remaining gaskets shipped with other miscellaneous parts. Each
gasket has an adhesive strip to secure it to the NetServer. (See
Figure 5-19.)
You should have:
Three long folded-foam gaskets for the tops of the power supply bays
Three medium-length folded-foam gaskets for the bottoms of the
power supply bays
Six metal gaskets for the sides of the power supply bays
23. Clean the insides of the power supply bays with alcohol or other fluid. Rust
preventive oil, applied during the manufacturing process, must be removed
to ensure good adhesion of gaskets.
Locate 3 Medium
Folded-Foam Gaskets for
Bottom of Power Supply Bays
Locate 6 Metal Gaskets
for Sides of Power Supply Bays
Figure 5-19. Locate Gaskets
Assembling the LXr 8500
59