Processors; Pci Boards; Returning Lxr 8000 Components To Hp - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 1
Using two memory boards, your maximum capacity with 256-MB DIMMs
is 8 GB.
NOTE Consult your NOS documentation to determine the maximum
amount of memory supported by your NOS. For example,
Microsoft Windows NT 4.0 and Novell NetWare 5 can address
a maximum of 4 GB of memory.

Processors

The upgrade kit comes with seven terminators to be used as needed. All
processors from the LXr 8000 can be moved into the LXr 8500.
You can purchase additional processors for a total of eight processors.
CAUTION
When the HP NetServer LXr 8500 is configured with multiple
processors, all the processors must have the same frequency,
stepping, and cache size. For example, do not mix 400-MHz
processors that have different-sized caches, and do not mix
400-MHz and 450-MHz processors.

PCI Boards

The LXr 8500 can accommodate a maximum of six 5V PCI boards. The other
four PCI slots can accommodate 3.3V PCI boards. You can place Universal
boards in any of the ten PCI slots. (Universal boards are dual mode and can be
used in both 3.3V and 5V slots.)

Returning LXr 8000 Components to HP

During the upgrade process, some NetServer LXr 8000 components are removed
and replaced by LXr 8500 components. You can return all removed to parts to
Hewlett-Packard for recycling.
Introduction
3