Mitsubishi Electric MN converter Operating Manual page 37

(8) Click on
The message "Finish the operation status monitor" will appear.
Click on
Clicking
Change the data name as required and save it. You may
enter your comment also.
Clicking
Returning to the main screen.
3.7.2 Screen Functions and Operations
- The operating condition and operating data are displayed every minute.
- The [Current Time] is displayed. The [Monitor ID] is displayed when saving data.
[Refer to 5.2 Operation Status Monitor Data]
(1) "Operation Buttons"
allows operation in the same manner as a remote controller.
[Refer to 3. 10 Operation Control]
Click on
[Refer to 3.7.1(8)]
(2) "Menu Bar"
[Return], [Print], [Graph] and [Help] are displayed on the menu bar.
- Click on [Return] to end the Operation Status Monitor
and return to the Main Screen.
- Click on [Print] and then select "Print screen" from the
sub-menu.
The hard copy of the screen will be printed from the
connected printer.
- Clicking [Graph] displays a message of "Make the
graph to data ?".
To graphing, click
operation monitor screen without graphing,
Click
- Click on [Help] and an explanation about "Terminology" and "Operation Method" will be displayed.
[Refer to 3.6 Connecting Information 3.6.2 (2)"Menu Bar"]
to end the Operating Status Monitor Screen.
to end or click on
displays the screen to save data.
does not allow the data to be saved.
to end the operation status monitor and return to the Main Screen.
, while to return to the
.
to not end.
36