Communication Ports - Motorola MOSCAD 68P02958C00-B User Manual

Communication Ports

The IP Gateway includes support for TCP/IP over 10 Mbits/sec Ethernet LANs for
communication with the SCADA, and three serial ports for MDLC over various links (radio,
dialup and dedicated lines, multidrop wireline, serial RS-232 or RS-485) for communication
with the MOSCAD RTUs.
The IP Gateway supports multiple logical channels running the TCP/IP protocol over
Ethernet, thus allowing multiple processes running on the SCADA computer, to
simultaneously access a number of functions in the IP Gateway.
The IP Gateway software supports four communication channels that can be configured to
support the following links:
Port 1 A
Port 1 B
Port 1 C
Port 2 A
Port 2 B
Port 3
Port 4
Ports 3 and 4 are available with one of the following options:
Note: The same plug-in boards that are used for the MOSCAD are used in the IP Gateway.
- Ethernet - 8-pin RJ45 connector, twisted-pair (TP)
- Ethernet - 15-pin AUI connector
- RS-232
- RS-485
- RS-232
- According to the plug-in board (see table below)
- According to the plug-in board (see table below)
For ... Plug-in
VHF/UHF Conventional FSK
VHF/UHF Conventional DFM
UHF + Single-site trunking DPSK
Multi-site UHF/860MHz
trunking radio
Serial Port RS-232
Line Modem 2400 bps Dial-up/Dedicated
Line Modem 1200 bps Dial-up/Dedicated
Model/Option Board
Factory
Installed
V356
V390
V370
V345
V226
V404
V219
V285
3-2
Hardware Installation
Field
Installed
FRN 5614
FRN 5546
FRN 5708
FRN5724
FRN 5639
FRN 5669