Motorola MOSCAD 68P02958C00-B User Manual page 386

14. Timeout in seconds in which no data was received and disconnecting/reactivating SLIP/PPP.
15. Time elapsed in seconds since the last received SLIP/PPP data from port.
16. Is PPP/SLIP driver in the process of being disconnected?
17. Is PPP/SLIP driver in the process of being connected?
18. Not relevant.
19. Not relevant.
20. Was an AT response noted when receiving data in SLIP/PPP mode? An AT response can be
ERROR, +CME ERROR, AT, ATH, etc. It indicates that the modem has moved to command mode
and therefore the driver needs to be disconnected.
21. Not relevant.
22. Not relevant.
## 2301 LEVEL = 1
PPP Status
---------------
LCP Layer Status: %%1
IPCP Layer Status: %%2
PAP Layer Status: %%3
CHAP Layer Status: %%4
PPP State
---------------
LCP Layer State: %%5
IPCP Layer State: %%6
PAP Layer State: %%7
CHAP Layer State: %%8
LCP Layer Retry: %%9
IPCP Layer Retry: %%10
PAP Layer Retry: %%11
CHAP Layer Retry: %%12
PPP Configuration
-----------------
Asyncctl
Magic
Maxmtu
Auth protocol:
Quality protocol:
Protocol comp.
Address comp.
IP Address
Tcp Compressio
Tcp Comp Max slot:
Tcp Comp slot
1. Status of LCP layer (up or down).
Terminate Configure
--------- ---------
%%9
%%10
%%11
%%12
My
------------
: %%13
: %%14
: %%15
%%16
%%17
: %%18
: %%19
: %%20
: %%21
%%22
: %%23
Failure
-------
%%9
%%10
%%11
%%12
Their
--------------
C-94
Software Diagnostics Output
Negotiated
----------