Fujitsu PRIMERGY BX600 User Interface Description page 150

Device Configuration Commands
7.4.1.7 speed-duplex
This command is used to set the speed and duplex mode for the interface.
Syntax
speed-duplex {10 | 100} {full-duplex | half-duplex}
100 - 100BASE-T
10 - 10BASE-T
full-duplex - Full duplex
half-duplex - Half duplex
Default Setting
None
Command Mode
Interface Config
This command is used to set the speed and duplex mode for all interfaces.
Syntax
Speed-duplex all {10 | 100} {full-duplex | half-duplex}
100 - 100BASE-T
10 - 10BASE-T
full - duplex - Full duplex
half - duplex - Half duplex
all - This command represents all interfaces.
Default Setting
None
Command Mode
Global Config
149
Command Reference
Intelligent Blade Panel Module