Fujitsu PRIMERGY BX600 User Interface Description page 225

Security Commands
EAP Response Frames Received: The number of valid EAP response frames (other than
resp/id frames) that have been received by this authenticator.
EAP Request/Id Frames Transmitted: The number of EAP request/identity frames that
have been transmitted by this authenticator.
EAP Request Frames Transmitted: The number of EAP request frames (other than
request/identity frames) that have been transmitted by this authenticator.
Invalid EAPOL Frames Received: The number of EAPOL frames that have been received
by this authenticator in which the frame type is not recognized.
EAP Length Error Frames Received: The number of EAPOL frames that have been
received by this authenticator in which the frame type is not recognized.
7.9.1.7 show dot1x summary
This command is used to show a summary of the global dot1x configuration and summary
information of the dot1x configuration for a specified port or all ports.
Syntax
show dot1x summary {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: The interface whose configuration is displayed.
Control Mode: The configured control mode for this port. Possible values are
force-unauthorized / force-authorized / auto.
Operating Control Mode: The control mode under which this port is operating. Possible
values are authorized / unauthorized.
Reauthentication Enabled: Indicates whether re-authentication is enabled on this port.
Port Status: Indicates if the key is transmitted to the supplicant for the specified port.
7.9.1.8 show dot1x users
This command displays 802.1x port security user information for locally configured users.
224
Command Reference
Intelligent Blade Panel Module