Fujitsu PRIMERGY BX600 User Interface Description page 246

Security Commands
Disabled
Command Mode
Global Config
7.9.5.2 tacacs mode
This command is used to enable/select/disable the TACACS server administrative mode
Syntax
tacacs mode <1-3> {master | slave}
no tacacs mode <1-3>
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to disable it.
Default Setting
Disabled
Command Mode
Global Config
7.9.5.3 tacacs server-ip
This command is used to configure the TACACS server IP address.
Syntax
tacacs server-ip <1-3> <ipaddr>
no tacacs server-ip <1-3>
<ipaddr> - An IP address.
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to remove the TACACS server IP address.
245
Command Reference
Intelligent Blade Panel Module