Fujitsu PRIMERGY BX600 User Interface Description page 201

Management Commands
Command Mode
Global Config
7.5.6.5 ip http secure-port
This command is used to set the SSLT port where port can be 1-65535 and the default is port
443.
Syntax
ip http secure-port <portid>
no ip http secure-port
<portid> - SSLT Port value.
no - This command is used to reset the SSLT port to the default value.
Default Setting
443
Command Mode
Global Config
7.5.6.6 ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Syntax
ip http secure-server
no ip http secure-server
no - This command is used to disable the secure socket layer for secure HTTP.
Default Setting
Disabled
Command Mode
200
Command Reference
Intelligent Blade Panel Module