Fujitsu PRIMERGY BX600 User Interface Description page 174

Management Commands
Display Message
IP default gateway: The default gateway for this IP interface. The factory default value is
0.0.0.0
7.5.1.3 show ip filter
This command displays management IP filter status and all designated management stations.
Syntax
show ip filter
Default Setting
None
Command Mode
Privileged Exec
Display Message
Index: The index of stations.
IP Address: The IP address of stations that are allowed to make configuration changes to
the IBP.
7.5.1.4 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and
port-channel (LAG) interfaces. For the standard implementation, the range of <1518-9216> is a
valid integer between 1518-9216.
Syntax
mtu <1518-9216>
no mtu
<1518-9216> - Max frame size (Range: 1518 - 9216).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for
the interface.
Default Setting
173
Command Reference
Intelligent Blade Panel Module