Http Commands - Fujitsu PRIMERGY BX600 User Interface Description

Management Commands
snmptrap ipaddr <name> <ipaddr> <ipaddrnew>
<name> - SNMP trap name.
<ipaddr> - an original IP address.
<ipaddrnew> - a new IP address.
Default Setting
None
Command Mode
Global Config
7.5.5.5 snmptrap mode
This command activates or deactivates an SNMP trap. Enabled trap receivers are active (able
to receive traps). Disabled trap receivers are inactive (not able to receive traps).
Syntax
snmptrap mode <name> <ipaddr>
no snmptrap mode <name> <ipaddr>
<name> - SNMP trap name.
<ipadd> - an IP address.
no - This command deactivates an SNMP trap. Trap receivers are inactive (not able to
receive traps).
Default Setting
None
Command Mode
Global Config

7.5.6 HTTP commands

7.5.6.1 show ip http
197
Command Reference
Intelligent Blade Panel Module