The Default Settings For All The Configuration Commands - Fujitsu PRIMERGY BX600 User Interface Description

The default settings for all the configuration commands

SSL
802.1X Port Authent.
RADIUS Client
IGMP Snooping
802.3ad
SNTP Client
TACACS
StormControl
Link State
Port-Backup
SNMP
9.2 The default settings for all the configuration commands
The default settings for all the configuration commands are shown in the following
table.
SB9 DEFAULT CONFIG
configure mode
Sntp
logging buffered
282
HTTP Mode (Secure): Disabled
Secure Port: 443
Secure Protocol Level(s): TLS1 SSL3
disable
disable
disable
enable
disable
disable
enable
disable
disable
sntp unicast client poll-interval 6
sntp unicast client poll-timeout 5
sntp unicast client poll-retry 1
sntp broadcast client poll-interval 6
sntp client port 123
sntp clock timezone Taipei 8 0 before-utc
logging buffered
logging buffered wrap
no logging console
no logging syslog
no logging syslog port
Default Settings
Intelligent Blade Panel Module