Figure 3.24 Settings Of Blue Screen Timeout ([Configuration] Tab) - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
Points to be considered for VMware
When switched to Reserved SB by the partition wherein ESX is in operation, the guest operating system may not be
activated at the time of the initial start after switching to the Reserved SB.
Set the items of automatic activation of guest operating system and Blue Screen Timeout while configuring the Reserved
SB in the partition wherein ESX is in operation.
For example, to reset the items 20 seconds after a panic occurs in the ESX host, set "20" to Blue Screen Timeout.
Remark
If items are not reset, when ESX host becomes panic, set "0" to Blue Screen Timeout.
Setting method of Blue Screen Timeout
Execute Blue Screen Timeout settings from vSphere Client.
1. [Configuration] tab of host is opened on vSphere Client. Click [Detailed settings] of [Software] column.
FIGURE 3.24
2. [Detailed settings] window is opened. Click [Misc] in left side column.
3. Each parameter is displayed in right side frame. Blue Screen Timeout value is set to [Misc. Blue Screen Timeout].
Settings of Blue Screen Timeout ([Configuration] tab)
39
CA92344-0536-04