Figure 3.4 Mmb Web-Ui [Login] Window; Table 3.6 Url To Be Entered For Login - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
 Login
1. Start the Web browser.
Remark
Enable JavaScript and download in the browser setting.
2. Enter next URL.
http://nodename:adminport
Standard http://nodename:adminport/login.cgi (In case of Windows Server 2012 R2, Windows Server 2012 and
Windows Server 2008 R2)
SSL https://nodename:adminport
Above-mentioned nodename: adminport is described in following format.
Nodename: Hostname, FQDN or IP Address of MMB.
Remark
adminport: port number assigned at the management port of the MMB (Default value is 8081 and 432 in
case of SSL)
Note
When an https connection is established, a warning message appears because the certificate is not one from
a third-party organization. Ignore it and continue establishing the connection.
3.
Since MMB Web-UI login window is displayed, enter user account and password and click on [Login] button.
Remark
At the time of initial start-up and if the settings have not been changed, following default user account and password
are applicable.

TABLE 3.6 URL to be entered for Login

MMB Web-UI [Login] Window
FIGURE 3.4
17
CA92344-0536-04