Management Lan Setting For Svagent - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation
5.2 Setting of SVS (SVagent/SVAgentless Service/SVmco)
has to be changed to
AppArmor has to restart after this change.
8. Restart syslog services by:
/etc/init.d/syslog restart

5.2.1 Management LAN setting for SVagent

In the following cases, management LAN (for communicating Operations Manager) setting is required.
1. ServerView Agent initial installation
2. The Partition is configured with disks which is replicated by the other Partition.
3. IP address of Management LAN is changed.
Windows
1. Confirm if a "ServerView Server Control" service is running.
Then, if the service is NOT running, start the service.
How to start a "ServerView Server Control" service
a. Click the [Start menu] -> [Control Panel] -> [Service].
b. Select the "ServerView Service Control" in the right side view.
c. Click the [Operation] -> [Start] in the menu bar, then a "ServerView Server Control" is started.
2. Copy a "MgmtIP.exe", which is included in the following directory of SVS DVD media, to an arbitrary folder on the target
Windows OS.
¥SVSLocalTools¥Japanese¥Svmanage¥Tools¥MgmtIP¥
3. Execute the following command on the Command Prompt.
<IP Address> below is IP Address of OS side of Management LAN.
* For IPv4 configuration
C:¥Temp¥MgmtIP.exe -i <IP Address>
* For IPv6 configuration
C:¥Temp¥MgmtIP.exe -k <IP Address>
4. The command is succeeded if the following message is shown.
MgmtIP:new management IP address $IP Address$ stored
Linux
1. Confirm if eecd process is running or not.
#ps ax |grep eecd
Then, if eecd is NOT running, start ServerView Agent.
#/usr/sbin/srvmagt start
2. Execute the following command for setting OS IP address.
#/usr/sbin/eecdcp -c oc=E002 oe=000C ¥'$IPADDRESS¥'
e.g.)
#/usr/sbin/eecdcp -c oc=E002 oe=000C ¥'192.168.0.1¥'
@{CHROOT_BASE} = ""
87
CA92344-0536-04