Figure 3.2 Location Of Mmb User Port; Figure 3.3 Network Configuration And Ip Address Of Management Lan - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
Connection of External LAN of PRIMEQUEST 2000 Series
Configuration of external LAN connection of PRIMEQUEST 2000 series and the notes for external LAN connection are
described below. Connection to an external LAN is recommended after setting the security. For details on security, see
"6.5 Set up of security"
.
FIGURE 3.3
Ports for managing MMB#0 and MMB#1 are connected to the external switching hub device using a LAN cable. At the
same time MMB console PC is also connected to the external switching hub device. Physical IP address and Virtual IP
address of MMB#0 and MMB#1 are set in identical subnet.
- Physical IP Address (In the above figure, MMB#0=192.168.2.100, MMB#1=192.168.2.101)
- Virtual IP Address (In the above figure, 192.168.2.102)
For external connection (Web browser, Terminal for Maintenance, REMCS, etc.), communication is done by virtual IP
address.
Location of MMB user port
FIGURE 3.2
Network Configuration and IP Address of Management LAN
15
CA92344-0536-04