Installation Of Operating System; Table 4.2 Operating System Installation Using Svim - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software
4.4 Procedures to install Windows into internal HDD/SSD

4.4.3 Installation of operating system

This section explains the installation of operating system using SVIM.
There are the following types of operating system installations using SVIM.
For the detailed procedures of each mode, see ServerView Suite ServerView Installation Manager.
Mode
Quick You can simply use the minimum settings necessary for operating
mode system installation. This mode uses Fujitsu's recommended settings.
Guide You can specify setup information by following the instructions of the
mode wizard. You can save the specified information in a configuration file for
use during reinstallation.
All the screenshots are the display examples. Contents displayed may differ depending on system configuration.
Operations
1. If setting is done, you can boot the ServerView Suite DVD from virtual media for the partition.
For details on configuration, see"1.6.2 Remote control operation (BMC)" of PRIMEQUEST 2000 series
Administration Manual (CA92344-0537).
2. The power supply of the partition is turned ON.
Note
It can be started by selecting "Force boot from DVD" by Boot Selector in MMB Web-UI or it can be started from the
virtual media by changing the boot order to DVD by UEFI. If it is started by selecting "Force boot from DVD" by Boot
Selector in MMB Web-UI it is started in Legacy mode.
When operating system corresponds to the UEFI mode, the installation can be done in UEFI mode by changing the
boot order according to the following procedure.
a. After turning on the power supply of the partition, while the FUJITSU logo is displayed, press any key (such as
[Space] key) except [Enter] key and the Boot Manager front page is displayed.
b. The menu is selected on the Boot Manager front page in the following order. [Boot Maintenance Manager]-
[Boot Options]-[Change Boot Order]-[Change the order]
c. For UEFI aware OS, UEFI: Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For Legacy OS, Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For details on the setting method of boot order, see "■ Change Boot Order of "3.5.2 [Boot Options] menu" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
d. [Commit Changes and Exit] - [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed. In case of English, select "English".
4. In initial display window, click the [Next] button as follows without setting anything.
5. Select [Deployment] on the [To Welcome ServerView Installation Manager] window.
6. Select the installation mode and the operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in the setting of operating system. Set the IP address after installing the
operating system.
7. Click [Installation Start].
The installation is started.
8. Replace with the installation medium of the operating system according to the instructions of SVIM.
TABLE 4.2 Operating System Installation using SVIM
Functional Overview
For easy installation.
For detailed setting of RAID or
OS.
66
Purpose
CA92344-0536-04