Figure 3.20 [Partition Configuration] Window Example - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
Removing of SB/Memory Scale-up Board and IOU
This section describes the method of removing the SB/Memory Scale-up Board or IOU from the partition.
Remark
You cannot remove an SB/Memory Scale-up Board or IOU while the operating system on the target partition is running.
Remove the SB/Memory Scale-up Board or IOU while the partition is in the POWER OFF status.
Operations
1. Click [Partition] - [Partition Configuration]
→ [Partition Configuration] window is displayed. For details of [Partition Configuration] window, see "1.3.4 Partition
Configuration] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
2. Click the radio button of the partition number from which the SB/Memory Scale-up Board /IOU has to be removed.
Memory Scale-up Board is shown as "SB" in [Partition Configuration] window.
3. Click the [Remove Unit] button.
[Remove SB/IOU from Partition] window is displayed. SB/Memory Scale-up Board and IOU are displayed in the
list. The SB/Memory Scale-up Board and IOU are incorporated in the partition that is selected by procedure 2.
For details of [Remove SB/IOU from Partition] window, see "[[Remove SB/IOU from Partition] window] of "1.3.4
[Partition Configuration] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.20 [Partition Configuration] Window Example
34
CA92344-0536-04