Set Up Of Snmp; Figure 6.6 Example Of [Network Protocols] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 6 Work after installation
6.5 Set up of security

6.5.2 Set up of SNMP

Simple Network Management Protocol (SNMP) is set up. Configure SNMP with the permission of Administrator.
Set whether to report any operational failure to an external destination, the notification destination.
- Enable SNMP
- Set the details of SNMP
- Set up transmission destination of SNMP trap
- Set up SNMP v3
Validate SNMP
Operations
1. Click [Network Configuration] - [Network Protocols].
→ [Network Protocols] window is displayed. See "1.5.4 [Network Protocols] window" of PRIMEQUEST 2000 series
Tool Reference (CA92344-0539) for the details of [Network Protocols] window.
2. Enter SNMP items.
3. Click [Apply] button.
Example of [Network Protocols] Window
FIGURE 6.6
110
CA92344-0536-04