Execution Of Installation; Table 4.3 Operating System Installation With Svim - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software
4.5 Procedures to install RHEL in SAN storage device

4.5.3 Execution of installation

The operating system installation with SVIM is explained.
There are the following types for operating system installation with SVIM. For the detailed procedure of each mode, see
ServerView Suite ServerView Installation Manager.
Mode Functional Overview
Quick mode The operating system can be installed with the recommendation
of Fujitsu only by setting minimum required limits.
Guide mode The setup information is set following the wizard. The
information which is set is saved in the configuration file, and it
can be used during reinstallation.
Operations
1. The settings are done to boot the ServerView Suite DVD from virtual media for the partition.
For details on configuration, see"1.6.2 Remote control operation (BMC)" of PRIMEQUEST 2000 series
Administration Manual (CA92344-0537).
2. The power supply of the partition is turned ON.
Note:
The UEFI boots or the Legacy boots can be selected in the following procedure.
a. Select [Force boot into EFI Boot Manager] in MMB Web-UI.
b. Turn on the power supply of the partition.
c. The menu is selected on the Boot Manager front page in the following order. [Boot Maintenance Manager]-
[Boot Options]-[Change Boot Order]-[Change the order]
d. For UEFI aware OS, UEFI: Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For Legacy OS, Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For details on the setting method of boot order, see "■ Change Boot Order of "3.5.2 [Boot Options] menu" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
e. Select [Commit Changes and Exit].
f. Return to the front page pushing the escape key twice.
g. Select [Boot Manager].
h. For UEFI aware OS, select UEFI: Fujitsu Virtual CDROMx xxx.
For Legacy OS, select Fujitsu Virtual CDROMx xxx.
3. Windows Boot Manager is displayed. Select the first menu in Windows Boot Manager.
4. After a period of time, the language selection window is displayed.
In case of English, select "English".
5. In initial display window, click [Next] button without setting anything.
6. Select [Deployment] in [Welcome ServerView Installation Manager] window.
7. Select installation mode, select operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in setting operating system. Set IP address after installing the operation system.
8. Click [Start installation].
The installation is started.
9. Replace with the installation medium of operating system according to the instructions of SVIM.
Operating system installation with SVIM
TABLE 4.3
Purpose
It is used when the operating system is
to be readily installed.
It is used when the details of RAID and
the operating system are set.
70
CA92344-0536-04