Partition Configuration (Physical Partition); Setting The Partition Configuration; Figure 3.18 [Partition Configuration] Window Example (Primequest 2800E2/2800E) - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation

3.4 Partition Configuration (Physical Partition)

3.4 Partition Configuration (Physical Partition)
This section describes partition configuration. PQ2400E2, 2800E2, 2400E and 2800E are available for these functions.
Power off, power on for every partition is required to reflect the configuration change of partition. All screenshots are display
examples. The displayed contents differ according to the system configuration.

3.4.1 Setting the partition configuration

This section describes addition and removal of operations of SB/Memory Scale-up Board and IOU.
Adding of SB/Memory Scale-up Board/IOU
SB/Memory Scale-up Board and IOU can be added to the partition.
Operations
1. Click [Partition] - [Partition Configuration]
→ [Partition Configuration] window is displayed. For details of [Partition Configuration] window, see "1.3.4 Partition
Configuration] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.18
2. Click the radio button of partition where SB/Memory Scale-up Board or IOU need to be added to.
Memory Scale-up Board is shown as "SB" in [Partition Configuration] window.
3. Click [Add Unit] Button.
→ [Add SB/IOU to Partition] window is displayed. Free SB/Memory Scale-up Board and IOU are displayed in the list.
For details of [Add SB/IOU to Partition] window, see " [Add SB/IOU to Partition] window] of "1.3.4 [Partition
Configuration] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
[Partition Configuration] Window Example (PRIMEQUEST 2800E2/2800E)
32
CA92344-0536-04