Epson Apex 20020, 20040 User Manual page 103

If you are copying a 1.2MB diskette, MS-DOS asks you to
6.
insert the source and target diskettes again. Follow the
prompts on the screen.
When the copy is complete, you see this message:
Copy another diskette (Y/N)?
Press Y and
7.
to return to the MS-DOS command prompt.
Using DISKCOPY with two diskette drives
Make sure the diskette you want to copy is write-protected.
1.
(See "Write-protecting Diskettes" in Chapter 3 for
instructions.)
2. If necessary, type
At the
3.
DISKCOPY A: B:
MS-DOS displays this message:
Insert SOURCE diskette in drive A:
Press any key when ready . . .
Insert the diskette you want to copy from (the source) into
4.
the diskette drive and press any key. DISKCOPY copies the
contents of the diskette to the computer's memory. Then
the screen displays this message:
Insert TARGET diskette in drive B:
Press any key when ready . . .
to copy another diskette or
Enter
: and press
C
: \> prompt, type the following and press
C
Using MS-DOS With Your Computer
N
to log onto drive C.
Enter
and
Enter
Enter:
4-31