Light Pen Check - Epson Apex 20020, 20040 User Manual

If all eight pages are correct, press Y and
filled with an incorrect number, press N and
the error message.

Light Pen Check

To check the function of a light pen connected to a color
graphics adapter card, press 8 and then
that a light pen connected to the color graphics adapter is
performing accurately. When you select this check, you see
these prompts:
Enter Y to start light pen check.
Enter N to return to the menu.
If you do not have a light pen attached, press
begin the test, press Y and
PLACE LIGHT PEN ON CENTER OF WHITE BLOCK
Touch the center of the white block on the screen with the
light pen. When the light pen is correctly positioned, the block
moves to another part of the screen for a second test. After
three successful tests, the check ends.
An error occurs if:
The light pen is not connected properly
You touch the screen at the wrong point
The light pen is malfunctioning
You do not touch the square within a certain amount of
time (which is dependent on the current CPU speed).
Enter.
Enter.
You see this prompt:
Enter.
Performing System Diagnostics
If any page is
to display
Enter
This test checks
and To
N Enter.
C-19