Epson Apex 20020, 20040 User Manual page 45

To change the display type, follow these steps:
1. Highlight
Display
appears to show the current setting. If you have an
80-column, color monitor installed, you see:
Color/graph.
** SAVE SETTINGS **
2. To change the monitor type, press
appears, listing the various options:
* Special options *
Color/graph.
Color/graph.
Monochrome
Choose the monitor type according to the combination of
monitor and video card you have, as follows:
If you have a monochrome monitor, choose
Monochrome 80 col,
video card installed.
If you have a color graphics monitor, select
Color/graph.
If you have an EGA or VGA monitor, and have
already installed the correct video card, select
* Special Options *. You
set a DIP switch on the video card which overrides the
display setting in CMOS RAM. See the instructions
that came with the video card.
If you have a composite color monitor, such as a
color television with a video input, try selecting
Color/graph.
run Setup again and select
col.
and press
Enter.
80 col
Enter.
80 col
40 col
80
c o l
regardless of the type of
80
c o l .
80 If resolution is poor,
col.
Color/graph. 40
Running the Setup Program
Another menu
This menu
may also need to
2-5