Setting The Type Of Display - Epson Apex 20020, 20040 User Manual

2. To change the Main memory setting press
value changes to 256KB. Press
512KB. If you press
640KB.
3. To change the Expansion memory setting, highlight the
Expansion
memory in 64KB increments by using the + and -keys. For
example, to increase the expansion memory from 0KB to
256KB, press + four times. The screen displays the
following:
** SAVE SETTINGS **
4. When you finish setting the amount of memory, highlight
** SAVE SETTINGS
to the main menu.

Setting the Type of Display

Select the
using a color graphics monitor or if you change the video card
in your computer.
Note
If you are using the
computer, make sure that both monitor
"color/mono") are set correctly if you are using a
monochrome or color graphics monitor. One monitor switch
is on the MGA card on the back of the compuer and the
other is on the front. See Chapter 1 for instructions.
Enter
option. You can increase and decrease the
640 KB Main
256 KB Expansion
Display option
MGA card that came with your
again to change
Enter
again, the value returns to
** and press
Enter
in the main menu if you are not
switches
The
Enter.
it to
to return
(labelled