Changing The Disk Drive Settings - Epson Apex 20020, 20040 User Manual

Changing the Disk Drive Settings

Use the
Mass storage
install an additional diskette drive or hard disk drive, or if you
remove an existing drive. Follow these steps:
1. Highlight
menu like this:
Drive A:
Drive B:
Drive C:
Drive D:
** SAVE SETTINGS **
2. To change the value for one of the diskette drives—
drive B, for example-highlight
Enter.
Not
360
720
1.2
1.44 MB drive (3.5")
3. Highlight the type of drive that matches the second
diskette drive installed in your computer; then press
to select it. The second menu disappears and the Mass
storage menu shows the new setting.
4. To change the value for drive C, the hard disk, highlight
that option. Then use the + or - key to increase or decrease
the value until the number matches the type of drive
installed in your computer. See Appendix F for a list of
hard disk drive types. If you are not sure which one you
have, consult your dealer.
Mass storage
1.2 MB
None
Type2
none
A second menu appears:
installed
KB drive
KB drive (3.5")
MB drive
option of the main menu if you
and press
Enter. You
Drive B
Running the Setup Program
see a
: and press
Enter
2-7