Setting The Real-Time Clock - Epson Apex 20020, 20040 User Manual

Use this same procedure if you need to change the setting
for a second hard disk drive installed in your computer
(drive D).
5. When all the disk drive settings are correct, highlight
** SAVE SETTINGS

Setting the Real-time Clock

The real-time clock in your computer keeps track of the time
and date at all times-even when the computer
Use the
Real-time clock
date for your computer after you set it up. You may need to use
it again later to adjust the time for daylight savings time. The
computer automatically changes the date for leap years.
Note
Another way to change the real-time clock's time and date
is with the MS-DOS (version 3.3 or later) TIME and DATE
commands. See your MS-DOS Reference Manual for
instructions.
Follow these steps to set the real-time clock:
1. Highlight
see the current setting for the time and date:
17: 10: 54
03 - 21 - 1989
2. To change the time, highlight
This box appears:
hh : mm : ss
—
Real-time clock
Time
Date
** and press
Enter.
is
option to set the time and
and press
and press
Time
turned off.
Enter. You
Enter.