Solving Problems
104
The message
Not Supported
Make sure the correct input signal is selected in the Settings menu
■
(see page 55).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600
1200), and the refresh rate is supported by the projector
(see page 118). If necessary, change your computer's resolution
setting as described in the following section.
Only part of the computer image is displayed.
Press the
button on the remote control.
■
Auto
Make sure the image
■
menu. See Chapter 4 for more information.
Make sure your computer's resolution setting is correct. Ideally, it
■
×
should be 1024
768 to match the projector's native resolution.
If this option isn't available, select one of the other compatible
video formats listed on page 118.
Windows:
■
Right-click the desktop, select
tab, and select a different resolution.
■
Mac OS X:
Open
System Preferences
then select a different resolution.
Mac OS 8.6 to 9.x:
■
On the Apple menu, choose
Monitors and Sound
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
is displayed.
setting is correct on the Signal
Position
Properties
, double-click
Control Panels
. Select a different resolution.
, click the
Settings
, and
Displays
, then click