Epson PowerLite 6100i User Manual page 59

■
User's Logo
Turn this setting
On
captured whenever the projector is turned on. See page
page 65 for more information.
■
Projection
Projector is in front of the screen.
Front:
Projector is in front of the screen, mounted
Front/Ceiling:
upside-down from the ceiling.
Projector is behind the screen.
Rear:
Projector is behind the screen, mounted
Rear/Ceiling:
upside-down from the ceiling.
■ Operation
Direct Power On:
starts as soon as you plug in the power cord. You don't have
to press the P Power button.
When this feature is enabled, the projector's
Sleep Mode:
lamp automatically turns off when the projector has not
received any input signals for more than 30 minutes. This
conserves electricity, cools the projector, and extends the life
of the lamp. To resume projecting, press the P
button.
High Altitude Mode:
projector above an altitude of 4,921 feet.
■
Standby Mode
Select
Network On
control functions while the projector is in standby mode.
■ Air Filter Setting
Lets you turn the air filter replacement
Alarm Timer:
notification on or off. If you are using the smoke air filter,
make sure this setting is turned
Lets you change the amount of time the projector
Timer:
waits before displaying the air filter replacement notification.
to display the image or logo you have
When this feature is enabled, projection
Turn this setting
On
to use the network monitoring and
.
On
note
When Direct Power On is
enabled, press the P
button to turn the projector
off, wait until the P Power
light remains solid orange,
then unplug the projector.
Power
when using the
Configuring the Projector
Power
59