Shutting Down The Projector - Epson PowerLite 6100i User Manual

Shutting Down the Projector

When you've finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. Turn off and disconnect any equipment plugged into the
projector.
2. To turn off the projector, press the P
Power button
3. When the P Power light is steady orange, you can unplug the
projector.
With Epson's exclusive Instant Off
cool-down period, so you can pack and go immediately after
turning off the projector.
button twice.
Power
™
technology, there's no
note
When the projector has not
received any input signals
for 30 minutes, it
automatically turns off the
projector lamp and enters
"sleep mode." This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the P button.
Power
If you are done using the
projector, unplug the power
cord. To turn off sleep mode,
see page 59.
Turn off this product when
not in use to prolong the life
of the projector.
caution
To avoid damaging the
projector or lamp, never
unplug the power cord when
the P Power light is green
or flashing orange.
Projecting
39