Selecting Network Settings
Use the Network menu to configure the projector's network settings
and set it up for network use.
1. Press the
button on the remote control, highlight
Menu
, then press the
Network
menu.
2. Use the
pointer button to highlight menu items, then press
the
button to select from any of the following options:
Enter
■
Wired LAN
Lets you turn DHCP
DHCP:
Lets you assign an IP address to the projector.
IP Address:
Subnet Mask:
projector.
Gateway Address:
the projector.
MAC Address:
■
PJLink Password
Lets you assign a password to be used when accessing the
projector with PJLink software.
■
Web Control Password
Lets you assign a password to be used when accessing the
projector using Web Control.
button to select the Settings
Enter
or
On
Off
Lets you assign a subnet mask to the
Lets you assign a gateway address to
Lets you view the projector's MAC address.
.
Configuring the Projector
61