Notes When Using Red Hat Enterprise Linux As4/Es4, Or Oracle Enterprise Linux - Hitachi XP P9500 User Manual

Command suite for linux(r)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

If all the following conditions are satisfied, even a path in the normal
status might become Offline(E) or Online(E):
¢
¢
¢
If this problem happens, reduce the I/O load, and then return the path
status to Online by performing an online operation.
Although the following messages are output when you load the alert
driver and the filter driver respectively, HDLM operations are not affected.
sddlmadrv: unsupported module, tainting kernel.
sddlmadrv: module license 'Proprietary: Contact Hitachi for any
bugs' taints kernel.
If you start the host when using an HDLM device as a boot disk, the error
message KAPL05023-E might be output to the syslog file. However, HDLM
operations are not affected.
dlmmgr: KAPL05023-E Could not process the IOCTL(0000125F).
(00000000:00000000)
Notes When Using Red Hat Enterprise Linux AS4/ES4, or Oracle
Enterprise Linux 4
Note the following when your OS is Red Hat Enterprise Linux AS4/ES4, or
Oracle Enterprise Linux 4:
Before you update the kernel package, uninstall HDLM. After you have
updated the kernel package, re-install HDLM.
For details on HDLM installation and uninstallation, see
page 3-75
SCSI devices corresponding to an HDLM device can be removed
dynamically even while the HDLM device is in use. Before doing so,
perform the following operations:
a
.
b
.
When a device is dynamically configured by using the udev function, the
messages shown below might be output to the console or syslog.
However, HDLM operations are not affected.
Output example:
scsi_id[a01]: Cannot find sysfs device associated with /sys/
block/sddlma01
For a01 in the above examples, any alphanumeric character can be
output.
4-4
A storage system that has a SATA drive is being used.
There is a heavy I/O load on the storage system.
Path health checking is set to ON.
and
Uninstalling HDLM on page
Unmount any devices mounted on the HDLM device.
Execute the dlmcfgmgr -o command to exclude the HDLM device
from management.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Installing HDLM on
3-216.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dynamic link manager

Table of Contents