Hitachi XP P9500 User Manual page 390

displayed by the dlnkmgr view -path -item command and the parameter
values for displaying each item.
Items displayed by the dlnkmgr view
PathID
PathName
HBAPortWWN
DskName
iLU
ChaPort
Status
Type
IO-Count
IO-Errors
DNum
HDevName
IEP
#
-hdev host-device-name
-stname
6-38
Table 6-11 Correspondence between the items displayed by the
dlnkmgr view -path -item command and the values of the -item
-path -item command
#
#
Because both PathID and Status are always displayed, you do not
have to specify any parameters.
In the sub-parameters following -path -item, you can list the paths
(-hdev) and sort the list (-srt). If you omit both parameters, the
command displays information for all the paths in ascending order of
AutoPATH_IDs.
These sub-parameters are:
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see
HDLM Devices on page
The host-device-name string is case-sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd for the -item parameter.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
parameter
Values specified after the -item
None
pn
hbaportwwn
dn
lu
cp
None
type
ic
ie
dnu
hd
iep
Logical Device Files for
2-11.
parameter