Hitachi XP P9500 User Manual page 518

Message ID
KAPL09216-E
8-58
Message Text
An error occurred during I/O of
a file that installhdlm uses. Error
Code = aa...aa,bb...bb
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
aa...aa: Error number (decimal
number) that specifies the
executed processing
Action
If the error code is 4:
The /var/tmp directory does
not have enough unused
capacity, or the user does not
have write permission for it.
Make sure there is enough
unused capacity and that the
user has write permission for
this directory, and then try
again.
If the error code is 6:
The /etc/opt directory does
not have enough unused
capacity, or the user does not
have write permission for it.
Make sure there is enough
unused capacity and that the
user has write permission for
this directory, and then try
again.
other error code:
Contact your HDLM vendor or
the maintenance company if
there is a maintenance
contract for HDLM.
Details
An error occurred during I/O of a
file that installhdlm uses.
aa...aa: Error number that
indicates the executed processing
(decimal (base-10) number)
bb...bb: Return value of the
executed processing (decimal
(base-10) number)
Action
Make sure that sufficient unused
capacity exists for the /tmp
directory. If the capacity is
insufficient, allocate the required
amount of capacity, and then
retry the operation. For details
about the required unused
capacity. For details about the
required unused capacity, see
Disk Requirements on page 3-64
in Memory and Disk Capacity
Requirements on page 3-64.