Connection - Toshiba JK-MX16A Instruction Manual

Connection

Basic Wiring Example:
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Camera
Installation Steps
(1) If cameras are to be looped out to other devices, the termination switch inside the unit has to be set to off. (Refer
to page 12 for details)
(2) Set the time and date on the menu screen.
(3) If the time-lapse VCR is equipped with an on-screen menu for programming, use the VCR Bypass function to view
the on-screen menu on the monitor. (Refer to page 15 for details).
(4) Select the desired recording mode on the time-lapse recorder.
(5) Select a recording mode in the multiplexer that matches the record mode on the VCR. (Refer to page 22
"Recording Functions" for details
(6) When alarm output contacts of this unit are to be connected to the VCR, it will be necessary to program the alarm
recording duration of the time-lapse recorder to "MANUAL". The recording duration of the alarm event will be then
be controlled by the dwell time that is programmed in the JK-MX16A. (Refer to page 23 for details).
- 11 -
JX-MX16A
Alarm In
GND
Alarm Out
REC Trigger In
RECORDER OUT
RECORDER IN
MAIN
CALL
VCR
ALARM IN
REC TRIGG. OUT
VIDEO IN
VIDEO OUT
Monitor
Monitor