Table of Contents
Advertisement
•
8+2 screen
The Duplex View Window will be in position A.
* When a recording is made and the multiplexer is programmed in "High
Density" mode, the 8+2 screen is not available.
•
12+1 screen
The Duplex View Window will be in position A.
* This screen pattern is only displayed in the Live mode.
Day/Night Function
This unit is a time-linked function that provides increased gain of the video level of the various cameras. To further
improve the S/N ratio of the image, the signal is intentionally output as a black-and-white signal.
The Day/Night function will function on the main monitor output as well as the VCR output; however, it will not
function on the call monitor output.
Note that if the Night mode is set while normal level video is being input, such as a daytime scene, the output
image will exhibit a white-out phenomenon. Please exercise caution when setting this function.
To set the Day/Night Function gain, use the
(1) Use the LIVE/PLAYBACK button to select the Live mode. (The LED will light).
(2) Press the FULL SCREEN button to display the Full screen.
(3) Select the camera to set and press the
(4) Press the
Gain
1 L : Low
2 M : Medium
3 H : High
(5) Press the
- 17 -
or
button to set the gain you desired.
button to finish setting Day/Night gain level.
,
,
, or
buttons in the Full screen.
button.
Monitor Screen
A
Monitor Screen
A
Advertisement
Table of Contents
