Table of Contents
Advertisement
Call Mon Callout
When an alarm signal is activated, the call monitor output displays the alarmed camera channel. Each camera
channel can be programmed independently.
1 Off
: Does not callout alarmed camera to call monitor when alarm signal is activated.
2 On
: Calls out alarmed camera to call monitor when alarm signal is activated.
3 Sche. : Calls out alarmed camera to call monitor based on a timer schedule.
VCR Callout
When an alarm signal is activated, the VCR records the camera that is in alarm condition with higher priority.
Recording priority is set in the Alarm Rec. Priority menu.
1 Off
: Alarmed camera is not routed to the VCR for priority recording.
2 On
: Alarmed camera is routed to the VCR for priority recording.
3 Sche. : Alarmed camera is routed to the VCR for priority recording based on timer schedule.
Alarm Dwell Time
Sets the alarm dwell time when the alarm signal has been input. Settings can be made for each channel,
independently.
10 sec
1 1 to 180 sec : Alarm operation is held only for the set time.
2 Manual : Alarm operation is held while the alarm signal is being input.
3 Inf
: The alarm operation is held until the ALARM RESET reset button is pressed or the power is switched off.
Buzzer
Sets the buzzer On/Off when the alarm signal is input. Settings can be made for each channel, independently.
1 Off : Buzzer is not sounded.
2 On : Buzzer is sounded.
4.3 Motion Functions
Motion Sensitivity
Sets the sensitivity of the motion detection. Settings can be made for each channel,
independently.
1 Low
: Low sensitivity
2 Middle : Normal
3 High
: High sensitivity
Motion Direction
Sets the detection direction of the motion detection. Settings can be made for each channel, independently.
Overall
Right & Left
1 Overall
: All up/down and left/right directions
2 Top
Bottom : From top to bottom direction only
3 Bottom
Top : From bottom to top direction only
4 Right
Left
: From right to left direction only
5 Left
Right
: From left to right direction only
6 Top & Bottom
: Vertical direction (from top to bottom, or from bottom to top) only
7 Right & Left
: Horizontal direction (from right to left, or left to right) only
...
180 sec
Manual
Top
Bottom
Bottom
Top & Bottom
Inf
01 sec
...
Top
Right
Left
Right
Left
Motion Functions 1/2
Motion Sensitivity
Motion Direction
Motion Size
Motion Area
Detection Mode
Motion Counter Display
:Select
ENTER:Next
MENU:Return
- 24 -
Advertisement
Table of Contents
