Table of Contents
Advertisement
Motion Dwell Time
Sets the alarm dwell time when the motion detection is used as an alarm. Settings can be made for each channel,
independently.
10 sec
1 1 to 180 sec : Holds the alarm operation for the set time only.
2 Inf
: Press the ALARM RESET button or maintain the alarm operation until the power is switched off.
Buzzer
Sets the buzzer On/Off when the motion detection is used as an alarm.
1 Off : Buzzer is not sounded.
2 On : Buzzer is sounded.
4.4 Video Loss
Video Loss on/off
Sets the channel to perform video loss detection. Settings can be made for each
channel, independently.
1 Off
: Video loss is not detected.
2 On
: Video loss is detected
3 Sche. : Detects video loss when the time is within the set time.
Main Mon Callout
Sets the operation of the main monitor output when video loss has been detected. Settings can be made for each
channel, independently.
1 Off : No action is taken even if video loss is detected.
2 On : The screen takes on the 4x4 screen format when video loss is detected and "LOSS" is displayed.
(Video loss operation)
Video Loss Dwell Time
Sets the video loss dwell time when video loss has been detected. Settings can be made for each channel,
independently.
10 sec
1 1 to 180 sec : Holds the alarm operation for the set time only.
2 Inf
: Press the ALARM RESET button or maintain the video loss operation until the power is switched off.
Buzzer
Sets the buzzer On/Off when video loss has been detected.
1 Off : Buzzer is not sounded.
2 On : Buzzer is sounded.
4.5 Alarm Event Log
Allows view of all activity log event including video loss, motion detection activation,
and alarm input activation.
...
180 sec
Inf
...
180 sec
Inf
01 sec
...
01 sec
...
Video Loss
Video Loss on/off
Main Mon Callout
Video Loss Dwell Time
Buzzer
:Select
ENTER:Next
MENU:Return
Alarm Event Log
[No.] [CH] [Date]
[Time]
[A]
0
--
:Next
MENU:Return
SEQUENCE:Reset
- 26 -
Advertisement
Table of Contents
