Sequence Set-Up - Toshiba JK-MX16A Instruction Manual

6. Sequence Set-up

6.1 Call Mon Sequence
The camera sequence dwell time and camera selection that's displayed in the call
monitor can be programmed in this menu. By pressing the ENTER button while in the
Call Mon Sequence menu, all connected cameras will be added to the call monitor
sequence selection. Once the ENTER button is pressed, the multiplexer will detect the
presence of a camera input signal and will automatically add each camera to the
sequence process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu.
Dwell : 1 sec to 60 sec
6.2 Main Mon Sequence
The camera sequence dwell time and camera selection that is displayed in the main
monitor can be programmed in this menu. By pressing the ENTER button while in
the Main Mon Sequence menu, all connected cameras will be added to the main
monitor sequence selection. Once the ENTER button is pressed, the multiplexer will
detect the presence of a camera input signal and will automatically add each camera
to the sequence process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu.
Dwell : 1 sec to 60 sec.
6.3 2x2 Sequence
The camera sequence dwell time and camera selection that is displayed in the lower
right channel of a 2x2 display can be programmed in this menu. By pressing the
ENTER button while in the 2x2 Sequence menu, all connected cameras will be
added to the sequence selection of the lower right channel in the 2x2 display. Once
the ENTER button is pressed, the multiplexer will detect the presence of a camera
input signal and will automatically add each camera to the sequence process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu.
Dwell : 1 sec to 60 sec.
6.4 3x3 Sequence
The camera sequence dwell time and camera selection that is displayed in the lower
right channel of a 3x3 display can be programmed in this menu. By pressing the
ENTER button while in the 3x3 Sequence menu, all connected cameras will be
added to the sequence selection of the lower right channel in 3x3 display. Once the
ENTER button is pressed, the multiplexer will detect the presence of a camera input
signal and will automatically add each camera to the sequence process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu.
Dwell : 1 sec to 60 sec
Sequence Set-up
Call Mon Sequence
Main Mon Sequence
2x2 Sequence
3x3 Sequence
8+2 Sequence
12+1 Sequence
:Select ENTER:Next
MENU:Return
Call Mon Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
Main Mon Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
2x2 Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
3x3 Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
- 28 -