Toshiba JK-MX16A Instruction Manual page 7

• Video Loss
This unit is equipped with video loss detection. Each camera can be individually programmed. (Refer to
page 26 for details)
• Motion Detection/Counter Functions
This unit provides extensive video motion detection capabilities. Among the programmable parameters
available are motion direction, motion size, motion area, sensitivity, dwell time, and display mode. In
addition, each motion event can be logged to a counter and displayed to the monitor. (Refer to page 24 for
details)
• Display Mode Save/Recall Function
The monitor display mode as specified by the front panel can be saved and recalled. When power is
switched off and then on again, the unit will start up from the saved condition. (Refer to page 20 for
details)
• High Density Function
This feature effectively doubles the amount of images that are recorded. High density mode operate only
in modes slower than 24 hour standard density (SP) or 48 hour high density (EP). (Refer to page 23 for
details)
Duplex View Function
The duplex view function allows the VCR playback image to be displayed while simultaneously viewing live
images. (Refer to page 16 for details)
• Zoom Function
The zoom function allows a live camera image to be enlarged up to five times the normal size. (Refer to
page 14 for details)
• VCR Playback Adjustment Function
This function allows the user to maximize the stability of the playback images. Essentially it helps
minimize vertical jitter and minimize the mixing of playback cameras. (Refer to page 15 for details)
• VCR Bypass Function
Many VCRs have on-screen displays that require a monitor in order to program the VCR. The JK-MX16A
offers a VCR Bypass function that allows the user to directly view the output of the VCR enabling. This
enables the user to view and program any on screen menus, which the VCR may have. This feature can
also be used to directly view the VCR's output in order to adjust VCR tracking. (Refer to page 15 for
details)
• Discreet Camera Function
There might be some instances where certain cameras are to be recorded but not necessarily monitored
live. One example would be a hidden or discreet camera that is to be hidden from the guard that is
monitoring the camera. In this case, discreet camera function can be used to "hide" a camera from the
security guard while still being recorded onto videotape. (Refer to page 21 for details)
- 6 -