View the VCR Playback Image
The various display options are as follows:
1 When playing back a tape that was recorded with the multiplexer set to "Normal" record mode, the following
display options are available:
• Full Screen
• 2x2 Screen
• 3x3 Screen
• 4x4 Screen
• 8+2 Screen
• PIP
2 When playing back a tape that was recorded with the multiplexer set to "High Density" record mode, the
following display options are available:
• Full Screen
• 2x2 Screen
VCR Bypass Function
The image output from the VCR can be viewed directly on the main monitor.
1 Holding down the LIVE/PLAYBACK button for 2 seconds or longer sets the VCR Bypass mode. (The LED is
flashing).
2 To exit the VCR direct mode, press the LIVE/PLAYBACK button one more time.
VCR Playback Adjustment Function
The JK-MX16A has the VCR Playback Adjustment function for offering users improved image quality and
synchronization.
• Adjustment
(1) Use the LIVE/PLAYBACK button to select the playback mode (and LED will go off).
(2) Play the time-lapse VCR.
(3) Press the SEQUENCE button.
(4) The VCR playback adjustment screen will appear.
(5) Press the
(6) Press the SEQUENCE button once again to return to the original screen.
* Please readjust this adjustment when the playback speed of the time-lapse VCR has been changed.
* Please readjust this adjustment when playing back a tape that has been recorded in a different recording time
mode.
* These adjustment contents will return to normal when the power is off.
- 15 -
or
button to minimize the mixing of the images of other channels.