Toshiba IP EDGE User Manual page 63

Table 8:
Speed Dial Capabilities
Long SD Numbers
Storing Personal Speed
Dial Names
Assign Station Speed Dial
Names
IPedge UG 11/11
1. Press Spdial on an IP5000-series digital telephone
or press the
2. Dial the Station or System Speed Dial Number. Station Speed Dial
numbers occupy numbers 100~199. System Speed Dial numbers occupy
numbers 200~999.
Feature
Speed Dial (Dialing an SD number)
a
Station
1
System
a. Stations must be assigned/enabled Speed Dial capabilities in system programming.
b. If your telephone does not have a Spdial button, press the * button, then dial the three digit Speed Dial
bin number (nnn).
Go to Enterprise Manager.
1. Click on Station > Station Assignment.
2. Click on the Basic tab.
3. Enter the desired number of SpDial Bins.
4. Set System Speed Dial to enable/disable. Default is Disable.
5. Click on the Save icon.
Up to 32 digits can be stored in one SD location. If you exceed 32 digits, the
excess digits are automatically stored in the next sequential SD location. If SD
100 contains 40 digits, then 8 of those digits would be stored in SD 101. If you
save other digits to SD101 they will over-write the eight digits automatically
stored there.
You can store names with Personal Speed Dial numbers. These names will
display as Soft Keys which can be used for dialing from the telephone LCD
directories.
Notes:
Speed Dial locations must be assigned to your telephone by your System
•
Administrator before you can store names. Your System Administrator
can also associate names with Station Speed Dial numbers.
Only the Administrator telephone can store System Speed Dial numbers.
•
Web-based User Administration
1. Login and select Speed Dial, then select or enter the desired Speed Dial
Index and set the number and name.
TOSHIBA
*
button on any telephone.
Feature Access Code Sequences
b
+ nnn
Spdial
nnn = 100~199 Station SD numbers
2 nnn
+
Spdial
nnn = 200~999 System SD numbers
IPedge
Feature Operations
59