Table of Contents
Advertisement
Item
FR
SUPER
FR
No.
DISP.
No.
When set to 59.94 Hz
0000
0001
0002
When set to 50 Hz
0000
0001
026
PLY LST FMT
0000
0001
0002
0003
028
AVCHD FMT
0000
0001
0002
031
OUT REF
0000
0001
032
REC REF
0000
0001
040
VFR REC
Setting
SUPER
DISP.
59.94Hz
SYSFMT
Specifies the format used by the playlist.
30PN
<In the DVCPRO HD format>
24PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 REC FMT (HD).
1: 720/30PN (when set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 720/24PN
SYSFMT
<In the AVC-Intra format>
25PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 (REC FMT (HD)).
1: 1080/30PN (when set to 59.94 Hz)/1080/25PN (when set to 50 Hz) or 720/30PN (when
set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 1080/24PN or 720/24PN
NOTE:
• When 480i or 576i is selected in setup menu No. 020 (SYS FORMAT), a 30PN and
24PN selection is handled as a SYSFMT setting.
• The number of lines in the AVC-Intra format depends on the setting in the setup menu
No. 020 (SYSFORMAT).
• When a selection other than 59.94 or 50 is made in setup menu No. 25 (SYSTEM
FREQ), the format selected in menu No. 020 (SYS FORMAT) and No. 025 (REC FMT
(HD)) is used.
PH
59.94Hz
HA
Specifies AVCHD recording rate.
HG
0: PH mode (approx. 21 Mbps)
HE
1: HA mode (approx. 17 Mbps)
2: HG mode (approx. 13 Mbps)
3: HE mode (approx. 6 Mbps)
NOTE:
• Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
• In 720P mode, recording is always made in PH mode.
AUTO
59.94Hz
REF
Select reference for video output.
INPUT
0: Uses the reference signal input to the REF connector as reference. When there is not
input to the REF connector, the selected video input signal is used as reference. When
there is no reference and video input signal, the internal clock is used.
1: The reference input signal is used as reference. If there is no such signal, the internal
clock is used.
2: The video input signal is used as reference. If there is no such signal, the internal clock
is used.
NORMAL
59.94Hz
SLTC
Specifies the reference to synchronize the frames for recording.
0: The input video signal is automatically identified and serves as reference.
1: The time code which is input to the SD I IN connector is identified and serves as
reference.
NOTE:
When the SLTC is selected, the following settings are necessary to validate the settings
for this item:
• Setup menu No. 25 (SYSTEM FREQ): 59.94
• Setup menu No. 020 (SYS FORMAT): 720p
• INPUT SELECT VIDEO button on the unit: HDSDI
OFF
29.97Hz
ON
Specifies whether or not to make a VFR recording when the recording format is 720p.
0: Does not make VFR recording
1: Makes VFR recording
➝ Refer to "Variable Frame Rate-Recording" (page 43).
Settings and brief function description
50Hz
only
only
50Hz
50Hz
29.97Hz
25Hz
only
59-23Hz
60-24Hz
60-25Hz
only
only
Setup: Item Settings
163
Advertisement
Table of Contents
