Table of Contents
Advertisement
Resolution:
AVC-Intra 100:
1920 × 1080 (1080/59.94i, 1080/50i)
1280 × 720 (720/59.94p, 720/50p)
AVC-Intra 50:
1440 × 1080 (1080/59.94i, 1080/50i)
960 × 720 (720/59.94p, 720/50p)
VIDEO INPUT
Analog composite input:
BNC × 1 (VIDEO IN), 1.0 V[P-P] (75 Ω)
Reference input:
Automatic switching of black burst/HD 3
value SYNC, BNC × 1 (loop through × 1),
automatic 75 Ω termination provided
SDI input:
BNC × 1, complies with SMPTE 292M/
296M/299M during HD SDI input, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-
4 during SD SDI input
VIDEO OUTPUT
SD analog composite output:
BNC × 1
AUDIO
DIGITAL AUDIO
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB
(at the reference level)
Dynamic range:
Better than 85 dB
(1 kHz emphasis off, "A" weighted)
Distortion:
Less than 0.1 %
(1 kHz, emphasis off, reference level)
Crosstalk:
Less than –80 dB
(1 kHz, between 2 channels)
Headroom:
12/18/20 dB selectable
De-emphasis:
T1 = 50 µs, T2 = 15 µs (auto on/off)
AUDIO INPUT
Analog input (CH1, CH2, CH3, CH4):
XLR × 4, 600 Ω/high impedance selectable
(factory setting: high impedance)
+4/0/–3/–20 dBu selectable
Only CH2 input can be switched between
LINE/MIC/MIC +48 V
MIC:
–60 dBu
MIC+48V:
Phantom +48V supported, –60 dBu
Digital input:
BNC × 2 (CH1/2, CH3/4)
AES/EBU format SMPTE276M
SDI input:
BNC × 1, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
HD SDI/SD SDI output (switchable):
BNC×1, complies with SMPTE 292M/296M/
299M during HD serial digital output, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-4
during SD serial digital output
VIDEO ADJUSTMENT RANGES
Video output gain: Can be set to -∞ to +3 dB or -∞ to +6 dB
depending on menu
Video output chroma gain:
-∞ to +3 dB
Video output HUE (chroma phase):
±30°
Video output setup level:
±10 %
Video output sync phase:
±15 µs
Video output SC phase:
±180°
AUDIO OUTPUT
Analog output (CH1, CH2, CH3, CH4):
XLR × 4, low impedance,
+4/0/–3/–20 dBu selectable
Digital output:
BNC × 2
(CH1/2, CH3/4)
AES/EBU format SMPTE276M
SDI output:
BNC × 1, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
Pin jacks × 2, –8 dBV, 600 Ω
Monitor output:
Stereo mini jack (3.5 mm diameter), 8 Ω,
Headphones:
variable level
211
Specifications
Advertisement
Table of Contents
