Connecting The Receiver; Connecting The Receiver To The Antenna - Silvercrest SL35T Operation And Safety Notes

Connecting the receiver

Connecting the receiver

Connecting the receiver to the antenna

Caution!
Remove all plastic wraps from the receiver before
connecting it to the antenna. Otherwise the receiver
can suffer damages. Danger of overheating.
Connect the receiver to the antenna by using an
antenna cable.
The antenna cable is not included in the scope of
supply.
Caution!
Connect the receiver to the mains supply only after you
have connected it to all equipment and the antenna
properly. Otherwise, the receiver can suffer damages.
The wire netting and the inner core of the coaxial cable
carry current during operation if the 5V supply voltage
is enabled.
16