Epson Stylus Pro 7450 User Manual page 150

3 Paper check light
(red)
4 Ink check light
(red)
On:
No paper is loaded in the manual feed when
Sheet is selected as the paper source.
Roll paper is out when Roll Auto Cut On
Roll Auto Cut Off
source.
The selected paper source (Roll Auto Cut On
/Roll Auto Cut Off
match the paper source in the printer driver.
The paper lever is in the released position.
The loaded paper is too thick for head
cleaning.
Flashing:
Paper is jammed.
Paper is almost out.
Paper is not cut correctly after the print job
when Roll Auto Cut On
paper source.
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.
On:
The installed ink cartridge is expended.
The installed ink cartridges cannot be used
with this printer.
The maintenance tank is full.
Flashing:
The installed ink cartridge is nearly expended.
The maintenance tank is nearly full.
The Control Panel
is selected as the paper
/Sheet ) does not
is selected as the
or
150