❏ Change the interface of your computer to USB 2.0.
❏ Delete unnecessary files to make room on your hard disk
drive.
Roll paper cannot be cut
Try one or more of these solutions:
❏ Make sure that paper cutter cover is set correctly. See
"Replacing the Paper Cutter" on page 261.
❏ Make sure that the Roll Auto Cut On
Paper Source on the LCD panel. If not, press the Paper
Source l button to select it.
❏ Make sure that Normal Cut, Single Cut, or Double Cut is
selected as the Auto Cut in the printer driver. See "Roll paper
cut for borderless printing" on page 97.
❏ Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see "Paper" on page 353). If so, the paper
cutter may be blunt and require replacement. See "Replacing
the Paper Cutter" on page 261.
Note:
If you use roll paper other than Epson special media, see the user
documentation included with the paper, or contact your supplier.
is selected as the
Problem Solver
306